How Much Does Appliance Repair Cost?

Learn the typical cost for professional appliance repair from Blair Appliance Repair:

Kitchens are full of several electrical appliances. An electrical oven, dishwasher or refrigerator must have up-to-code wiring. In the event an electrical appliance is incorrectly installed, it creates a legitimate possibility of causing a fire. To be sure your electrical appliances are installed correctly, it’s important to hire an experienced service for appliance repair CITY.

DIY electrical troubleshooting for appliances isn’t a good idea. There are one or two minor repairs where DIY can be a consideration. In those cases, be sure to use the proper tools and to always shut off the power.

Repairing larger kitchen appliances, however, is much more complicated. You should not consider ”do-it-yourself” repair. Your range, for one example, can require a 250- or 125-volt circuit whether it’s electrical or gas-powered, and you’ll want no less than two 20-amp, 125-volt circuits to power smaller electrical appliances. These types of circuits can each power a couple of electrical outlets, but do not overload them — which often means, a third is needed.

The possibility of a short (and therefore major injury or even death) during any larger repair usually is not worth it. Just call a professional in CITY, STATE.

You can do a search for appliance repair companies in CITY on the internet. Find repairmen with good customer reviews. Or ask for a referral from a acquaintance if you are having problems with an oven, dishwasher or refrigerator.

Hiring professional appliance repair services begins with finding a service in CITY that has experience in repair of kitchen appliances. Some services are appliance-specific, and won’t offer repair for all types of household appliances.

The main reason many appliance repair companies aren’t safe to service a kitchen appliance is due to all of the electrical appliances that require water to run. Most refrigerators use water to make ice and dishwashers always need water to operate. Water is extremely dangerous when performing electrical repairs.

If electrical repairs aren’t done correctly and waterlines rupture, as an example, there’s a very real risk of electrocution. Electricity and water don’t mix.

Which is why you need a CITY appliance repair service who is able to deal with both elements.

Certified appliance repairmen will cost in the neighborhood of $50 to $75 an hour for their work, and independent contractors might cost around $75 and $120 per hour. This could sound like a lot, that is because it’s better to pay a higher price for excellent work. If a repair service costs lower than $25 an hour, be skeptical.

Be sure the service is in possession of a permit from CITY for any type of electrical work. Some low-quality services will say that they will not require a permit, but do not believe it. Always check with CITY officials.

Most technicians in CITY can charge a built-in cost for their travel, from $40 to $65. You will have to pay the complete fee regardless of if the repair is completed, so have a list available of appliances for the repairmen to troubleshoot.

The national average is $159 for refrigerator repairs – services in CITY will typically charge $80 to $150 per hour. Expect a $40 to $85 trip charge too for the company to come and troubleshoot the problem.

The prices for brand new kitchen appliances can range somewhere between $325 and $7,500. The broad range depends the kind of kitchen appliance, such as a expensive refrigerator compared to a low-cost dishwasher.

Repairing or upgrading an electrical kitchen appliance is possibly the most complex repair projects one can require in a kitchen.

One way to limit these types of issues is listening attentively to a technician when he or she completes an estimate for service. Certain wiring types must be used dependent on the type of kitchen appliance, and colors of wires (for ground or neutral) might are different when state laws and requirements are updated.

Additionally, several jurisdictions now demand arc fault protection for kitchen electrical circuits and ground fault circuit interruption (GFCI) protection. If the service provider fails to mention this, or implies that you do not “need” them, you should call someone else.

And, to monitor a contractor closely when he completes the review of the range. If it is a brand new kitchen appliance the repairman is installing, question if it is able to use the same circuit or will need an enhancement since there are noticeable size and power usage differences in newer models. The same recommendation can be applied to dishwashers and ovens.

professionals have to be able to convey what they will do, why it is important and justify each piece of the fee, which includes appliance parts, labor and miscellaneous. Some appliance repair companies willing to wave the trip fee if service is performed.


Appliance Repair Tips
Appliance Safety
Repair or Replace Appliances
Refrigerator Parts